Online UPS
PlusI ISO Rack/Tower Series 6000VA to 10000VA
The PlusI ISO Rack/Tower Series 6000VA to 10000VA is a true double conversion online UPS with pure sinewave output, zero transfer time and enhanced capacity. Main UPS, isolation transformer and battery are in aplit 3U rack/tower convertible box individually. With split-type design, it flexibly complies with users' demand no matter for standard or long time operation. Featuring 6000VA, 10000VA integrated with LCD display, high output power factor 0.9, outstanding performance, optional isolation transformer box and optional external battery bank, PlusI ISO Rack/Tower Series stand out as high efficient online UPS during harsh mains condition for mission critical equipment in data/computer center or industrial applications.
* High performance true double conversion Online UPS 6000VA to 10000VA
* Microprocessor control guarantees high reliability
* External battery box to extend backup time (Optional for PlusI-6KLRBE(-ISO)/PlusI-10KLRBE(-ISO))
* Isolation transformer in split rack box with maintenance bypass switch (Optional for PlusI-6KLRB(E)-ISO/PlusI-10KLRB(E)-ISO)
* Low heat dissipation in long time operation
* Input THDi < 5% / Output THD < 2%
* Emergency power-off function (EPO)
* High efficiency mode (ECO mode)
* Fan speed control & DC start
* Output voltage regulation < 1%
* Automatic self-testing function
* Power management software
* Output power factor 0.9
| MODEL | PlusI-6KLRB(-ISO) | PlusI-6KLRBE(-ISO) | PlusI-10KLRB(-ISO) | PlusI-10KLRBE(-ISO) |
| CAPACITY | 6KVA/5.4KW | 6KVA/5.4KW | 10KVA/9KW | 10KVA/9KW |
| INPUT | ||||
| Phase | 1 Phase 2 Wires with Ground | |||
| Voltage | 220/230/240Vac | |||
| Frequency | 50Hz or 60Hz (Auto-Sensing) | |||
| THDi | < 5% with R full load | |||
| OUTPUT | ||||
| Phase | PlusI-6KLRB(E)/ PlusI-10KLRB(E): 1 Phase 2 Wires with Ground | |||
| PlusI-6KLRB(E)-ISO/ PlusI-10KLRB(E)-ISO: 1 Phase 3 Wires with Ground | ||||
| Voltage | PlusI-6KLRB(E)/ PlusI-10KLRB(E): 220/230/240Vac | |||
| PlusI-6KLRB(E)-ISO/ PlusI-10KLRB(E)-ISO: 220/110Vac, 230/115Vac, or 240/120Vac (set via control panel) | ||||
| Voltage Regulation | PlusI-6KLRB(E)/ PlusI-10KLRB(E): +/-1% | |||
| PlusI-6KLRB(E)-ISO/ PlusI-10KLRB(E)-ISO: +/-2% | ||||
| Frequency ( Battery Mode) | 50Hz or 60Hz +/- 0.05Hz | |||
| Waveform | Pure Sinewave | |||
| THD | < 2% (linear load), < 5% (non-linear load) | |||
| Crest Ratio | 3 : 1 | |||
| EFFICIENCY | ||||
| To AC Mode | > 92% at full load and battery fully charged | |||
| To Battery Mode | > 92% at full load and 12VDC/battery | |||
| To ECO Mode | > 96% at full load and battery fully charged | |||
| BATTERY | ||||
| Voltage | 240VDC | |||
| Type | 12V/7AH*20pcs | Extendable | 12V/9AH*20pcs | Extendable |
| Recharge Time | 7 hours to 90% |
Depend on capacity of external battery |
8 hours to 90% |
Depend on capacity of external battery |
| TRANSFER TIME | ||||
| Line Mode to Battery Mode | 0ms | |||
| Inverter to Bypass | 0ms | |||
| ECO Mode to Inverter | < 10ms | |||
| DISPLAY | ||||
| LED Indicator | Normal (Green), Bypass (Yellow), Fault (Red), Battery (Yellow) | |||
| LCD Display |
Load level, Battery voltage, Battery mode, AC mode, Bypass mode information |
|||
| AUDIBLE ALARM | ||||
| Battery Mode | Beeps Every 4 Seconds | |||
| Low Battery | Sounding Every Second | |||
| Overload | Sounding Twice Every Second | |||
| Fault | Beeping continuously | |||
| COMMUNICATIONS | ||||
| Interface (Port) | Dry Contact (Optional) ; USB Port | |||
| Intelligent Slot | Slot for SNMP or AS400 card (Optional) | |||
| EPO | Emergency Power Off | |||
| ENVIRONMENT | ||||
| Operating Temperature | 0° C - 40° C (32° F - 104° F) | |||
| Humidity | 0-95% (Non-condensing) | |||
| Acousitc Noise | <50 dB at 1M | |||
| PHYSICAL | ||||
| Rack Height of Main UPS | 3U | |||
| Main UPS (D*W*H) | 610*440*135mm | |||
| Rack Height of Isolation Box | 3U | |||
| Isolation Box(D*W*H) | 610*440*135mm | |||
| Rack Height of Battery Box | 3U | |||
| Battery Box (D*W*H) | 610*440*135mm | |||
