Australian Socket (Type I)

> Products > Line Interactive UPS > Australian Socket (Type I) > Plus3E Series
600VA to 800VA

Plus3E Series
600VA to 800VA


The Plus3E series offers guaranteed battery backup power during outage and unsafe fluctuation, along with full protection from damaging surges and spikes. Featuring 600VA to 800VA configuration with microprocessor controller, voltage stabilizer, LED status indicators in a compacted slim unit, Plus3E series UPS is a good choice to keep wireless networks, computers, gaming consoles and other electronics connected during utility blackout.
 

#Plus3E-600AU / Plus3E-U600AU / Plus3E-S600AU / Plus3E-US600AU / Plus3E-800AU / Plus3E-U800AU / Plus3E-S800AU / Plus3E-US800AU

* Controlled by a technologically advanced microprocessor guaranteeing high reliability        
* Equipped with 2-steps boost & 1-step buck AVR to stabilize output voltage        
* USB port and monitor software is designed to manage UPS status via PC (Optional)  
* Coaxial cable line / modem / phone protection (Optional) 
* Built-in DC start function enables UPS to be started without AC power supplied        
* Constant current, constant voltage battery charger (CCCV Battery Charger)        
* UPS will charge itself even though power switch is off (Off mode charging)        
* Over / under voltage protection (UPS will go to battery mode)        
* Lightning / surge protection 175 joules        
* UPS will shut down upon battery low ; UPS will restart automatically upon AC recovery (Auto-restart)    
* Smart USB charging station 5VDC 2.4A max. for smart devices power charging (Optional)

CAPACITY 600VA/360W 800VA/480W
INPUT
Voltage 220/230/240Vac
Voltage Range -30% +25%
Frequency 50Hz or 60Hz (Auto-Sensing)
OUTPUT
Voltage Regulation +/- 10%
Frequency AC mode: 47-53Hz for 50Hz or 57-63Hz for 60Hz ; Battery mode:50Hz or 60Hz +/- 1Hz
Waveform Simulated Sinewave
Transfer Time < 6ms(Typical)
Outlet: Australian 3pcs with Backup/AVR/Surge protected + 3pcs Surge protected only
Coax-TV Protector (Optional) 2 ports
USB Charge (Optional) 2 ports 5VDC, 2.4A Max.
BATTERY
Type Maintenance free sealed lead-acid battery
Voltage 12VDC
Capacity & Number 12V/7AH*1pc 12V/9AH*1pc
Recharge Time 5 hours to 90% after complete discharge
Safety Protection Over Charge & Over Discharge Protection
Advanced Battery Management Yes
DISPLAY
LED Status Indicators AC normal (Blue), Battery backup(Yellow), UPS cut off/Fault(Red)
AUDIBLE ALARM
Battery Mode Two short tones every 8 seconds
Low Battery Four short tones every second
Overload Red LED: Flashing, Buzzer: Beeping continuously
Fault Beeping continuously
MANAGEMENT
USB Communication port (Optional) Download monitoring software can support Microsoft Windows 2000/XP/Vista/7/8/10, Microsoft Windows Server 2003/2008/2012, Novell NetWare v3.1x/v4.x/v5.x, Linux, FreeBSD, MacOSX10.5.5
ENVIRONMENT
Operating Temperature 0° C - 40° C (32℉~104℉)
Humidity 0-95% (Non-condensing)
Acoustic Noise <40 dB at 1M
PHYSICAL
Dimension (D*W*H) 320*175*95mm

*Product specifications are subject to change without further notice.

MODEL NAME POWER RATING MODEL FORMAT INDICATORS USB COMMUNICATION PORT USB CHARGE SOCKET TYPE
Plus3E-600AU 600VA/360W Brick Type LED N/A N/A Australian (Type I)
Plus3E-U600AU 600VA/360W Brick Type LED YES N/A Australian (Type I)
Plus3E-S600AU 600VA/360W Brick Type LED N/A YES Australian (Type I)
Plus3E-US600AU 600VA/360W Brick Type LED YES YES Australian (Type I)
Plus3E-800AU 800VA/480W Brick Type LED N/A N/A Australian (Type I)
Plus3E-U800AU 800VA/480W Brick Type LED YES N/A Australian (Type I)
Plus3E-S800AU 800VA/480W Brick Type LED N/A YES Australian (Type I)
Plus3E-US800AU 800VA/480W Brick Type LED YES YES Australian (Type I)

*The capacity of connected loading do not exceed the capacity of UPS.

Plus3E series 600VA to 800VA         Brochure       Download

Plus3E series 600VA to 800VA         Manual          Download