Online UPS

> Products > Online UPS > Online UPS > PlusPRO 1 Series
ISO Tower 6000VA to 10000VA

PlusPRO 1 Series
ISO Tower 6000VA to 10000VA

The PlusPRO 1 Series ISO Tower 6000VA to 10000VA is a true double conversion online UPS with pure sinewave output and zero transfer time and enhanced capacity. Main UPS, isolation transformer and battery in a split box makes this UPS flexible to comply with the demand of single output voltage, or dual output voltage, or long-time operation. Featuring 6000VA, 10000VA integrated with LCD display, high output power factor 0.9, outstanding performance, optional isolation transformer box and optional external battery bank, PlusPRO 1 Series ISO Tower 6000VA to 10000VA model stand out as high efficient line of online UPS for mission critical equipment and industrial applications in long time operation or harsh mains conditions.

#PlusPRO 1-6KT-ISO / PlusPRO 1-10KT-ISO

* High performance true double conversion Online UPS 6000VA to 10000VA 
* Microprocessor control guarantees high reliability
* External battery box to extend backup time (Optional)
* Isolation transformer in split box for dual output voltage
* Terminal block type Power Distribution Unit (PDU) for input and output 
* Low heat dissipation in long time operation
* Input THDi < 5% / Output THD < 2%
* Emergency power-off function (EPO)
* High efficiency mode (ECO mode)  
* Fan speed control & DC start
* Output voltage regulation < 1%
* Automatic self-testing function
* Power management software
* Output power factor 0.9

Phase 1 Phase 2 Wires with Ground
Voltage  220/230/240Vac
Frequency  50Hz or 60Hz (Auto-Sensing)
THDi < 5% with R full load
Phase 1 Phase 3 Wires with Ground
Voltage 220/110Vac, 230/115Vac, or 240/120Vac (set via control panel)
Voltage Regulation +/-2%
Frequency ( Battery Mode) 50Hz or 60Hz +/- 0.05Hz
Waveform Pure Sinewave
THD < 2% (linear load), < 5% (non-linear load) 
Crest Ratio 3 : 1
To AC Mode > 92% at full load and battery fully charged
To Battery Mode > 92% at full load and 12VDC/battery
To ECO Mode > 96% at full load and battery fully charged
Type Maintenance free sealed lead-acid battery
Voltage 240VDC
Capacity & Number 12V/7AH*20pcs 12V/9AH*20pcs
Recharge Time 7 hours to 90% 7 hours to 90%
Line Mode to Battery Mode 0ms 
Inverter to Bypass 0ms
ECO Mode to Inverter < 10ms
LED Indicator Normal (Green), Bypass (Yellow), Fault (Red), Battery (Yellow)
LCD Display Load level, Battery voltage, Battery mode, AC mode, Bypass mode information
Battery Mode Beeps Every 4 Seconds
Low Battery Sounding Every Second
Overload Sounding Twice Every Second 
Fault Beeping continuously
Interface (Port) USB Port (Dry Contact is optional)
Intelligent Slot Yes, but SNMP card is optional
EPO Emergency Power Off
Operating Temperature 0° C - 40° C (32° F - 104° F)
Humidity 0-95% (Non-condensing)
Acousitc Noise <50 dB at 1M
Main UPS (D*W*H) 623*192*347mm
Isolation Box with Terminal PDU (D*W*H) 623*192*347mm
Battery Box (D*W*H) 623*192*347mm

 *Product specifications are subject to change without further notice.


*The capacity of connected loading do not exceed the capacity of UPS.

PlusPRO 1 Series ISO Tower 6000VA to 10000VA     Brochure     Download

PlusPRO 1 Series ISO Tower 6000VA to 10000VA     Manual        Download