The PlusGuard 10-15A is a multi-outlet design Voltage Protector rated at 15 Amps, prevents damages to electrical and electronic equipment from power fluctuation, especially over and under voltage levels of long duration. The 6 sec / 180 sec delay reconnection provides protection against power-back surge commonly experienced after resumption of power in a power cut situation. Build-in MOV excess electricity for additional protection. The PlusGuard 10-15A will automatically guard your equipment against brownouts or transient spikes induced by lighting or power line failure.
#PlusGuard 10-15A
* Microprocessor controlled design
* Absorbs excess electricity through MOVs
* Surge suppression 900 Joules
* Delay reconnection selector 6 sec / 180 sec
* High voltage and low voltage cut-off protection
* Grounded multi-outlet design
* Provide overload protection
* Wall Mountable
MODEL | PlusGuard 10-15A | ||
INPUT | |||
Max. Current | 15 Amps | ||
Nominal Voltage | 220-240Vac | ||
Line Low Loss | 180Vac | ||
Line Low Comeback | 190Vac | ||
Line High Loss | 268Vac | ||
Line High Comeback | 260Vac | ||
Frequency | 50Hz or 60Hz | ||
Spike Protection | 900 Joules | ||
Connector | Nema5-15P plug | ||
Cable Length | 1.8M(5.9ft) | ||
OUTPUT | |||
Nominal Voltage | 220-240Vac | ||
Frequency | 50Hz or 60Hz | ||
Delay Timer | 6 sec / 180 sec | ||
Connector | EURO-US socket*7pcs | ||
INDICATOR | |||
LED | 3 LEDs | ||
ENVIRONMENT | |||
Operating Temperature | 0° C - 40° C (32℉~104℉) | ||
Humidity | 0-95% (Non-condensing) | ||
Acousitc Noise | <40 dB at 1M |
*Product specifications are subject to change without further notice.
*The capacity of connected loading do not exceed the capacity of Voltage Protector.
PlusGuard 10-15A Brochure Download